Approvals and Specifications:
- ACEA C5
- API SERVICE SN Plus / SN-RC (Ressource Conserving)
- ILSAC GF-5
- BMW LL-17 FE+ (fully backward compatible with BMW specification LL-14 FE+)
- MB-Approval 229.71
- JAGUAR LAND ROVER STJLR.03.5006
- CHRYSLER MS-12145
- FIAT 9.55535-GSX / DSX
- FORD WSS M2C947-B1 / 962-A1
Motul 8100 Eco-Clean 0w-20 Description
High-tech 100% synthetic energy-saving motor oil specifically meets the requirements of Euro IV, Euro V, and Euro VI and requires the use of oil with a very low dynamic viscosity HTHS ≥ 2.6mPa.s, reduced sulfated ash (≤0.8%), phosphorus content (0.07%-0.09%) and sulfur (≤0.3%) – “Mid SAPS”. The 0W-20 viscosity grade minimizes internal hydrodynamic oil friction and ensures optimized fuel consumption, especially in the cold season. It provides excellent oil circulation, instant oil pressure build-up in the lube system, accelerated revs, and warm-up to the engine operating temperature.
The ACEA C5 standard requires significant oil film stability and low emissions for high horsepower engines. ACEA C5 also requires a significant reduction in friction to give energy saving performance. Thanks to its 100 % synthetic base oil and low SAPS level, MOTUL 8100 ECO-CLEAN 0W-20 provides a very stable oil film, reduces engine friction, and is compatible with sensitive after treatment systems.
This 100% synthetic engine oil has been developed to offer optimum lubrication for the latest generation BMW and MINI petrol and diesel engines, especially those fitted with gasoline particulate filters – GPF (Gasoline Particulate Filter) – approved to the BMW specification LL-17 FE+. The BMW Longlife-17 FE+ specification is specified for BMW petrol engines N20 and Bx8 manufactured in 2014 and used in the countries of the European Union, Norway, Switzerland, and Liechtenstein as well as in the United States of America and Canada. If in doubt about the use of this oil, always refer to the vehicle owner’s manual.
As an environmentally-friendly product, this type of oil helps to reduce fuel consumption and consequently to minimize greenhouse gas (CO2) emissions.
Motul 8100 Eco-Clean 0w-20 Features
MOTUL 8100 ECO-CLEAN 0W-20 meets all manufacturers’ requirements in terms of performance and reliability. MOTUL 8100 ECO- CLEAN 0W-20 is highly resistant to high temperatures, ensures. Minimizes oil consumption and reduces wear thanks to its excellent lubricating properties.
The SAE 0W-20 viscosity grade minimizes friction in hydrodynamic lubrication mode, ensuring high fuel economy, especially at low temperatures. Good permeability of the oil at startup allows to quickly reach the necessary pressure in the system and the engine to the necessary speed and temperature conditions to provide energy saving.
Motul 8100 Eco-Clean 0w-2 Application
It is specially designed for the latest generation cars equipped with petrol and diesel engines including direct injection engines which comply with Euro IV, Euro V, and Euro VI, where the use of oils with viscosity grade SAE 0W-20 and energy-saving properties is prescribed: ACEA C5/C6, API SP and/or ILSAC GF-6a.
Compatible with catalytic converters, petrol particulate filters (GPF), and diesel particulate filters (DPF).
Do not mix with oils that do not comply with ACEA C5.
Are you satisfied with the use of this engine oil?